RD-300GX: Assigning Expression To An EV-5 or EV-7

Tags: pedal, assign, expression, rd-300gx
Use the following procedure to assign Expression to an EV-5 or EV-7 pedal connected to the RD-300GX:

1. Connect the EV-5/7 to the CONTROL socket on the back of the keyboard.

2. Turn the rotary dial on the EV-5/7 to the "0" (zero) position.

3. On the RD-300GX, press EDIT so it is lit.

4. Use the INC/DEC buttons to select "COMMON."

5. Press ENTER.

6. Use the INC/DEC CURSOR to select "CTRL PEDAL FUNC."

8. Press ENTER.

9. Use the INC/DEC buttons to select “EXPRESSION."

10. Press EDIT so it is not lit.

Your Expression Pedal will now function as a volume pedal.

NOTE: You will have to save your settings in a SET-UP before you turn off the RD-300GX. See "Saving A SetUp" for instructions.


Quick Links