DJ-202 System Program (Ver.1.04)

How to know the version
Before you start, check the system program version of your DJ-202.
  1. While holding down the [rotary selector] in the Browser Section, connect the DJ-202 and the computer and turn on the power.
  2. The illumination pattern of the Performance pads in the Deck Section and the buttons in the Mixer Section indicates the current version.
    If these items are lighted as shown in the figure below, the unit is at the latest version. If the illumination pattern of the buttons is different from the figure, update the unit.
  3. After checking version of the product, power off the DJ-202 without performing any button operation.
Update history
[ Ver.1.04 ] OCT 2017
Bug Fix
The following bug was fixed.
Minor bugs have been fixed.
[ Ver.1.03 ] OCT 2017
Bug Fix
The following bug was fixed.
VINYL for DECK 3 and 4 cannot be turned off via operation from Serato Intro.
What you will need to update your DJ-202
  • DJ-202
  • USB cable included with the DJ-202
  • A computer with a USB connector ( Windows, Mac )
Caution when performing the update
  • Never apply this update data to any product other than the DJ-202. This update data may destroy the data or system program of other products.
  • Never power-off your DJ-202 while the update is in progress!
    If a power failure or similar accident occurs during the update process, the DJ-202 won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
  • We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

Getting the update file
Please open/extract the downloaded "" file on your computer to get the update file in the "dj202505_sys_104" folder.

Procedure for the update
  • You must not rename the extracted file.
  • Never turn off the DJ-202's power while the update is in progress. Otherwise the system program or the DJ-202 itself may be destroyed.

Please install the extracted system program file into your DJ-202 according to the following procedure.
  1. While holding down the [SYNC] button in the mixer section, connect the DJ-202 and the computer using the USB cable and turn on the power.
  2. Open the "Roland" drive folder in your personal computer.
  3. Copy DJ202-505_C0A_up.bin in the "dj202505_sys_104" folder into the "Roland" drive by dragging and dropping it.
    * Do not copy the "dj202505_sys_104" folder.
  4. Pressing the [SYNC] button in the mixer section starts the update.
    The performance pads flash while the update is in progress.
    When the performance pads stay lighted, the update is complete.
  5. Detach the USB cable and turn off the power.
    * The performance pads might flash at the first startup after the update. This is not a malfunction; without turning off the power, wait for the unit to start up.


Quick Links